KYMCO Brake Pad Chart: Front and Rear Pad Sets by Model

KYMCO brake pads are sold as complete OEM pad sets per caliper. This KYMCO brake pad chart lists every pad set in our catalog with the models it fits, and whether it sits on the front brake, the rear brake or both, so you can order front and rear together.

• Genuine part numbers61every one from KYMCO's own catalogue
• Model families144ATV, Scooter, Side by side, Motorcycle
• Drawn onF07 Front Wheelon the MXU 270i EURO (2026); the code differs by model
• Replace at1 to 1.5 mmof friction material; both pads in a caliper together

KYMCO brake pad part numbers by model

Front or rear comes from the diagrams each pad set is drawn on (Front Wheel, Rear Wheel, the rear caliper). Many ATV and UXV pad sets are drawn on both, because one set fits both ends. Scooters draw both brakes on a single Brake Master Cylinder diagram; for a pad set drawn only there, the side follows KYMCO's brake group number (45 front, 43 rear), so check it on that diagram.

Where the brake pad set is drawn

Open a card to see the brake pad set on that machine's factory diagram, with its callout number and every neighbouring part. The same part can sit under a different diagram code on another model, so use the chart above to find yours.

Why OEM pad compound matters

The factory pads are matched to the disc's material and the caliper's clamping force. Aggressive aftermarket compounds can bite harder cold but chew the OEM disc; too-soft ones fade downhill with a loaded UXV. The pad set in your parts diagram is the compound the brake system was homologated with.

How to confirm fitment for your exact model

Model names repeat across years and regions, so the safest way to order the right brake pad set is to confirm it on your model's own diagram:

1. Find your machine. Pick it on the All Models page, or decode your VIN with the VIN lookup to land on the exact model year and colour.
2. Open the diagram. The exploded views mirror KYMCO's factory fiche; the diagram cards on this page show which drawing the brake pad set sits on.
3. Match the number, then order. Check that the number on the diagram matches the row in the chart, then follow it to the product page on kymcopartsstore.com, where the part is ordered.

If a part number has been superseded, the product page shows the replacement, so you always receive the current factory part.

When to replace KYMCO brake pads

Check the pads whenever a wheel is off, and replace the set when the friction material is down to about 1 to 1.5 mm, wears unevenly, or the brake squeals persistently. Always replace both pads in a caliper together. If the pads wore fast or the lever feels spongy afterwards, inspect the brake disc and flush the fluid while you're in there.

Service specs by model

For one machine's battery, plug, oil, belt, torque figures and service intervals on a single page, open its service sheet:

• Agility 50
• Agility 125
• Compagno 110i
• Like 50 2T
• Like 150i
• Like 200i
• Super 8 150
• Super 8 50
• K-Pipe 125
• Spade 150
• People GTi 300
• X-Town 300i
• AK 550
• Mongoose 70S
• Mongoose 90S
• Mongoose 270
• Maxxer 300
• MXU 150
• MXU 270
• MXU 450i
• Maxxer 450i
• MXU 500i
• MXU 700
• UXV 450i
• UXV 500i
• UXV 700i
• People S 150
• MXU 270i Euro
• CV3
• Downtown 300i
• Downtown 200i
• Xciting 400i
• Super 8 150 (2008-2014)
• Super 8 50 4T (2008-2014)
• People GTi 200

Sources

• Part numbers and fitment: KYMCO's factory parts catalogue, the same exploded-view diagrams as our parts diagrams.
• Service intervals, torque and capacities for your exact model and year: KYMCO USA owner's manuals. Where this guide and your manual differ, the manual wins.