Service specs
KYMCO People GTi 200 Service Specs: Part Numbers and Intervals
Battery, spark plug, oil, filters, belt and torque for the KYMCO People GTi 200: KYMCO service data with the genuine part number and diagram for each.
This is the service sheet for the KYMCO People GTi 200 (4-stroke single, liquid cooled, 205 cc, fuel injected). It lists the battery, spark plug, filters, belt and the rest, each figure with the genuine KYMCO part number for the model years in our catalog (2012-2013) and the diagram the part is drawn on. The figures are KYMCO service data from the KYMCO People GT 200i / 300i service manual (2012-2017). When this page and your own manual disagree, the manual wins.
- Engine4-stroke singleliquid cooled, 205 cc, fuel injected
- Engine oil1.3 L at an oil change, 1.5...1.3 L at an oil change, 1.5 L dry
- Spark plugCR7Egap 0.6-0.7 mm
- BatteryYT12A-BS12 V 10 Ah
What to know before you order
The People GTi 200 runs the GTi 300's service list with a 205 cc engine: coolant (1,420 cc), a full-flow oil filter element plus a strainer screen, and 6,000 km for oil and the air filter after the 1,000 km first service. It takes the same YT12A-BS battery, CR7E plug and Maxxis 110/70-16 and 140/70-16 tires as the 300. Its own parts are the ECU and the weight roller set.
People GTi 200 service specs at a glance
| Item | Spec | Genuine part number | Diagram |
|---|---|---|---|
| Batteryall models | 12 V 10 Ah; charge at 1.2 A for 5-10 h |  31500-LEA6-900 |
 F11 Battery |
| Spark plugall models | gap 0.6-0.7 mm |  98059-57916-00 |
 E02 Cylinder Head Cover · Cylinder Head |
| Engine oil | 1.3 L at an oil change, 1.5 L dry | ||
| Oil filterall models | full-flow filter plus strainer screen |
 1541A-LEA7-E00 15421-LEA7-E00 15421-LEA7-E05 |
 E04 Right Crankcase Cover · Water Pump |
| Final drive oil | SAE 90; 0.21 L at a change | ||
| Coolant | 1,420 cc total; radiator cap 0.9 kg/cm² (12.8 psi) | ||
| Weight rollersall models | 20 mm OD new |  22121-LGF9-305 |
 E06 Drive Pulley |
| Brake padsall models | discs 5.0 mm new, 4.0 mm minimum |
 43105-LGE5-305 45105-LGE5-305 |
 F08 Rear Wheel |
| Tires | front 110/70-16, rear 140/70-16; 28.4 / 32 psi |
 42710-LLJ3-E0B 44710-LLJ3-E0B |
F08 Rear Wheel |
| Bulbs and fuses | headlight 12 V 60/55 W; fuses 10, 15 and 30 A |
 044.698 34901-KED9-900 34905-KHB5-9000 34906-KPCP-900 |
 F17 Light Tail |
The diagrams behind this sheet
Each row of the table points at the factory drawing its part sits on. Open one to see the callout number, the quantity and the gaskets and bolts around it.
E02 Cylinder Head Cover · Cylinder HeadOpen the diagram →
E04 Right Crankcase Cover · Water PumpOpen the diagram →
E06 Drive PulleyOpen the diagram →
F08 Rear WheelOpen the diagram →
F11 BatteryOpen the diagram →
F17 Light TailOpen the diagram →
F18 Harness WireOpen the diagram →
People GTi 200 maintenance intervals
Whichever comes first, distance or time. The first service is the one riders skip and the one that matters most on a new or rebuilt engine.
| Item | Interval |
|---|---|
| Engine oil and oil filter | replace at 1,000 km (600 mi), then every 6,000 km (3,750 mi) |
| Oil strainer screen | clean at 1,000 km (600 mi), then every 6,000 km (3,750 mi) |
| Air filter | replace every 6,000 km (3,750 mi) |
| Spark plug | replace every 12,000 km (7,450 mi) |
| Coolant | replace at 36,000 km (22,350 mi) |
| Drive belt | inspect at 18,000 and 36,000 km (11,200 and 22,350 mi) |
| Brake fluid | replace at 24,000 km (14,900 mi) |
Torque for the parts you replace
Clean, dry threads unless the row says otherwise. Aluminium cases strip long before a steel bolt complains, so use a torque wrench on the drain bolt and the plug.
| Fastener | N·m | ft-lb |
|---|---|---|
| Spark plug | 15-20 | 11-14 |
| Engine oil drain bolt | 20-29 | 14-22 |
| Oil strainer cap | 10 | 7.4 |
| Final drive drain bolt | 7.8-12 | 5.8-8.7 |
| Drive face nut | 88-98 | 65-72 |
| Clutch outer nut | 49-59 | 36-43 |
| Rear axle nut | 118 | 87 |
| Brake caliper bolts | 34 | 25 |
Electrical test values
Measured at about 20 °C with the connector unplugged. A reading far outside the range points at the part; a reading inside it sends you back to the wiring and the connectors.
| Part | Test value | Genuine part number |
|---|---|---|
| Ignition coil | primary 3.57-4.83 Ω; secondary 10.42-14.49 kΩ without the plug cap |  3051A-LGE5-E00 |
| Crank position sensor | 115 ± 15 Ω | |
| Fuel injection | injector 11.7 ± 0.6 Ω; throttle position sensor 3,500-6,500 Ω; water temperature sensor 2.076 kΩ at 25 °C |  39200-LGE6-E00 |
Every People GTi 200 part, drawn on its factory diagram: KYMCO People GTi 200 parts diagrams.
Which model year do I have?
The year decides which number is yours where a row lists more than one. Decode your VIN with the VIN lookup, or read the model code on the frame plate, then open that year's diagrams from the model list.